Tube Supports

Tube support systems are used for both simple and complex tubing and instrumentation installations.  

Stainless tube supports

Get A Quote


Inventory

MSI Supply can often provide the items listed below.  Large quantities, custom sizes, and special alloys (Alloy 20, Monel, Hastelloy, Inconel, Titanium, etc) may be subject to a longer lead time for delivery.

Tube Support Systems

Supports: Angle, Channel, Flatbar, Tube Clamps
Materials: Stainless

 

Materials

Tube supports are most commonly available in 304/304L stainless steel and aluminum.

Types of Tube Supports

Angle

Perforated Angle is designed to be a tubing support system which utilizes bolt together fittings to route tubing runs in an industrial application. The standard length of angle is 20ft.

Perforated angle is used for protecting long runs of instrumentation cable or tubing. The holes alternate between 9/16” dia. round and 5/16” square. This allows for the use of either carriage bolts or hex bolts. 

stainless perforated angle tube support

Channel

Perforated Channel is designed to be a tubing and cable support system which utilizes bolt together fittings to route tubing or cable runs in an industrial application.  The standard length of channel is 20ft. 

Perforated channel is used for protecting long runs of instrumentation cable or tubing. The holes alternate between 9/16” dia. round and 5/16” square. This allows for the use of either carriage bolts or hex bolts. Techline channel is a bolt together system. Hardware sold separately. This channel is intended to be used with the corresponding Techline fittings.

stainless perforated channel tube support

Flat Bar

Perforated Flatbar is designed to be a tubing support system or as splice plates, used to join two pieces of angle or channel, in place of traditional fittings. The standard length of flatbar is 10ft. 

Perforated Flat Bar is used for long runs of instrumentation cable or tubing. TechLine Flat Bar can also be cut and used for flat splices. The holes alternate between 9/16” dia. round and 5/16” square. This allows for the use of either carriage bolts or hex bolts.

stainless perforated flat bar tube support

Tube Clamps

Gang Clamps are used to hold down multiple tubes with a back plate.

stainless tube clamps single clamps and gang clamps

Manufacturers

MSI is a distributor for Techline Manufacturing, a top producer of tube supports.